Water Flow Restrictor RO System Plastic Quick Connect Fittings 300
CC Flow Rate
Item desciption :
|ITEM NO.||TUBE SIZE||TUBE SIZE||Flow Rate|
|036A||1/4 ” Pipe||1/4 ” Pipe||300 cc|
|036B||1/4 ” Pipe||1/4 ” Pipe||350 cc|
|036C||1/4 ” Pipe||1/4 ” Pipe||400 cc|
|036D||1/4 ” Pipe||1/4 ” Pipe||420 cc|
|036E||1/4 ” Pipe||1/4 ” Pipe||550 cc|
About Production :
▪ Flow rate for connecting and branching two pipe
▪ Slip openings for connecting to male unthreaded pipes or fitting
▪ PVC for corrosion resistance , high strength , and less weight
than fittings made from metal
▪ Smooth interior finish for reduced friction and material buildup
This fitting is T- shaped and has three openings to connect and
branch three pipes, two on the main run and one branch at a 90 -
degree angle from the middle of the tee. Pipe dimensions for tees
are represented as A x B x C. "A" and "B" indicate the main run on
the fitting, and " C " indicates the branch. It has female slip
openings or "sockets" for sliding over the ends of male unthreaded
pipes . The slip ends connect to pipes with a smooth bore for
enhanced flow .
This tee is made of PVC for corrosion resistance , high strength,
and less weight than fittings made from metal. It is compatible
with schedule 40 PVC pipes and fittings and is suitable for cold -
water pressure distribution systems including irrigation , pool and
spa , potable water , and chilled water applications .
1 . Manufacturer OEM and Good quality
2 . On time delivery
3 . Small MOQ Welcome
4 . PAYPAL and other easy payment
5 . Excellent sale service and after sale service
Quick fittings for water purification unit , RO system.
Quick fittings is applied to the quick connecting of PE pipe (
duamater:6.35mm ) and stainless steel pipe. Excellent performance
and reasonable price .
We offer different size of quick fittings accord with customers'
Welcome new and regular customers come to discuss business .
O - ring : EPDM
Collect - POM
Push - fit technoghy
Removable : Yes
For use with copper : Yes
For use with CPVC : Yes
Zero - leak connections
No tools tube inserts required
nlet Thread Type Compression / Push
Quick disconnection without other tools
Maximum Working Temperature : 44 F
Manimum Working Temperature : 44 F
Production system :
1 , Standardized production , rapid and efficient , delivery time
is 7 - 15 days , much faster than others
2 , Strict quality control , test each product before packaging to
ensure that every pcs is high quality
Preparation for installation :
1 . Avoding hot feed water , hot water might damage the RO membrane
2 . The feed water pressure under 3 kg/cm2 (40 psi ) is
appropriated . Higher water pressure might cause system leaked or
3 . If water pressure is much higher then 3 kg/cm2 (40 psi ) ,please install the pressure - reducing valve or select the system
without boost pump .
4 . If water pressure lower then 3 kg/cm2 (40 psi ) , please widen the tube diameter or shorthen the
tube to help pump working normally .